Prototype illustrative values, not project results

PFAS Input Comparator

Compares PFAS mass input and soil accumulation across agricultural inputs, with the uncertainty behind every number. One calculator, three audiences: each role gets its own question, examples, and view of the results.

Switch view: who is asking?

Ask a question

Mapped to calculator inputs
Numbers come from the calculator, never from a language model.

Calculator inputs

Edit any value

For farmers

Which input adds the least PFAS to my field, and how much builds up over time?

Annual PFAS mass input
Topsoil concentration after 20 years
Share from the selected input

Annual mass input by input type, at typical application rates

Median with 5th to 95th percentile range, mg of target PFAS per hectare per year. Selected input highlighted.

Table view

Topsoil accumulation over 20 years

Median line with 5th to 95th percentile band for the selected input and site. Other inputs shown as thin lines at their typical rates.

Table view

For utilities

If biosolids land application is restricted, how much PFAS input remains from other sources?

Table view

For regulators

Which inputs and site conditions should be prioritized for monitoring?

InputMedian input
mg/ha/yr
90% rangeRecordsEvidenceMain data gap

Site factors governing retention in topsoil

Relative importance from the hierarchical model. Illustrative ranking for the prototype.

How these numbers were computed

Every output traces to this record

Mass balance

Concentrations are drawn from lognormal distributions fitted to the occurrence database. Retention in the top 15 cm depends on soil class. 1,500 Monte Carlo draws per result.

Parameters used

ParameterMedianSpreadSource

Where the uncertainty comes from

Share of variance in the selected result. The sampling design in the project targets the largest term first.

Scope. This prototype shows the intended form of the comparative mass-input calculator: mass input and environmental fate, with uncertainty and a full computation record. It does not estimate exposure or health risk, and it does not state whether a field or product complies with any regulation. Values are illustrative placeholders standing in for the project database and models.